Otosia.com - Every vehicle should change the oil regularly, either brought to the workshop or to replace it yourself.
If you want to change the oil yourself, put your vehicle on higher ground and the position must be parallel between the front and rear (no italics). then, open the hood and remove the cover of the oil fill, so that when the oil is discarded or removed or drained can flow smoothly.
Then, set up a container to collect used oil, remove the engine cover bolts in the bottom of the machine by using a key offside. Noteworthy is the bolt that there is a ring or gasket, make sure the condition is in good condition, if damaged should be replaced with new ones.
After the used oil drained oil cap back in place, note when mounting bolts do not tilt, as it will result in leaks or oil will leak. Once the bolt is installed properly, enter the new engine oil in accordance with the specifications of your car engine.
To determine the amount of new engine oil that amount is sufficient or not, turn your car a few moments and then turn off, unplug the existing oil sticks to the left of the top of the engine, when the liquid oil hitting a top means sufficient numbers and vice versa.
Once the machine is turned on, check the bottom of the machine, make sure that no engine oil dripping on the oil drain bolt places or depletion. One thing we need to emphasize is this work should be done when the conditions the engine is hot, because at the time of the engine oil heat in a state of more dilute than the cold conditions, so that the dirt is dissolved in the oil is flowing out
